2003 kawasaki KX 250 "rear shock" Questions

...rear shock is out of oil how do i add oil to it If the bike is real bouncy with no dampining you need to have shock rebuilt you cant just add oil to fix.Most rear mono shocks have a little bottle of ...

rear shock i have a 96 KX 250 and i want to know how to rebuild my rear shock. I also would like to find out where i can buy a rebuild kit. thanks I would recomend that you have it done professionally

whats the nitrogen gas in the rear shock set at for an o1 kx250 In general, most of the KYB and Showa big bike suspensions are charged to around 140-150 PSI from the factory.

shock repair manual I have honda cb900 custom motorcycle and I'm looking to rebuilt my rear air shocks. Looking for repair manual. trying to remove rear shocks took off side and rear baggage do I need

rear shock removal What are the steps to remove rear shocks on a Heritage Softai Classic 2004? 1. Using a suitable lift, support motorcycle under frame until rear tire is slightly off the ground. 2. ...

rear shock spring from my 2004 crf 250r Put the bike on a stand supporting the bottom of the frame. Remove the seat and sidepanels. Loosen the clamp on the carb to airbox boot at the rear of the carb.

rear shock is ajustable 1 thru 5. I turned the shock to far past the #5 setting and it has dropped down. It seems locked in this spot. Help! rear shock is ajustable 1 thru 5. I turned the shock to far

...rear shock length 2001 electra glide classic rear shock length also what to measure to see if front has been lowered Harley usually uses a 12.5" shock but that could change from model to model and ...

rear shock How do I replace the rear shock You will need to suspend the rear of the bike letting the rear wheel hang free off the ground. After that its simple nuts and bolts. If i remember correctly ...

...rear shock? Can you adjust the rear shock for heavier load/taller stance? There is a shock company that makes progressive shocks for your bike. That is also the name of the shock, and a lot of them ...