2003 kawasaki KX 250 "low idle" Questions

...low speed screww, set it to factory and keep adjusting it 1/8 turn at a time until idle sounds best and quick throttle blips dont sound "stumbly" the later being the most important. The needle ...

ngk plugs gas ratio 50/1 with klotz whats is plug gap run ngk plugs gas ratio 50/1 with klotz run low rpm or idle will foul out what should i gap plug at on 2001 kx250 if thats the problem Go for .035

...Idle speed adjuster screw loose and set too low or toohigh. Look on carby end of cable for a stopper screw and lock nut. This is the idle step screw. loosen lock nut and screw in or out until idle is ...

idle screw and it does not work i suggest you clean of have the carburetor cleaned problem usually is the low speed jet is clogged. I suggest you have a mechanic take care of this problem. there could

bike starts fine, idles fine low end fine, mid and high are fine sometimes? think maybe power valves are sticking? when i floor the throttle exaust sound is real deep and no power, ride for a while ...

Low Rider idle speed question Apr 19, 2005 More results from www.hdforums.com Dyna Idling Issues ' Harley Davidson Forums harley-davidsonforums.com https://www.harley-davidsonforums.com > threads > d.

...idle on 2005 dyna fxdl low rider? On the carb the cable closest to the right side of the bike is the throttle cable and the one closest to the left side is the idle cable. Right about the middle ...