2001 kawasaki ZX-6R Ninja "remove replace ignition switch 04" Questions

...replace the ECU. *If the reading is within the standard range, remove the seat cover, and check the input voltage again at the sensor connector. *Remove the air cleaner housing (see Air Cleaner ...

...remove the maxi fuse or disconnect the main circuit breaker and leave the switch on, then replace your battery and maxi fuse/main breaker, for more information about your question please visit the ...

ignition resets itself, indicators go out and the bike will restart..Had the electrics thoroughly checked and problem remains a mystery.This doesn't happen every time high beam is on just periodically

...replace it with a short splicing tube turn on the ignition switch and recheck fuel pressure if pressure increases to the normal pressure you need a new filter $ 166 from Harley $40 from Drag ...

replace them. THEN install the spacer over the threaded post of the ignition switch housing until it contacts the switch position plate and arrange/locate the spacer so that the widest side is forward

...replace it with a short splicing tube turn on the ignition switch and recheck fuel pressure if pressure increases to the normal pressure you need a new secondary filter. 5. If all the above check out ...