2001 kawasaki ZX-6R Ninja "remove ignition switch" Questions

remove the ignition switch, unscrew the plastic lower and separate the switch from the lock and then turn the the centre of the switch with a screwdriver until the ignition lights up, when the lock is

...remove the ignition in order to get the key code from underneath? I need a new key and this is what the Kawi dealer instructed me to do. There are no key codes on the Ignition, if you can get the ...

...way, you can remove your ignition switch and send to Lock World, they can make you a key that way its better than buying a lock set from Kawasaki it would be a lot cheaper. Give them a call. Lock ...

...remove the wiring to the switch and bridge them with a split pin or similar, tur ignition on and see if fan runs, if fan runs sensor is faulty, if fan doesn't run check fuses if fuses ok suspect ...

...ignition switch OFF. ? Remove the ECU (see this chapter). Do not disconnect the ECU connectors. ? Connect a digital voltmeter [A] to the connector (8), with the needle adapter set. Special Tool· ...

remove ignition switch switch on 2013 Yamaha Royal Star To remove the ignition switch on a 2013 Yamaha Royal Star, you can follow these general steps: 1. Disconnect the Battery: Begin by disconnecting

...remove ignition switch on 2001 electra-glide Here is something a friend sent to me. I've never taken one of these switches out so I can't say for sure if this is correct but it's all I ...

...remove the IGNITION /LIGHT KEY SWITCH AND FORK LOCK for a 2005 FLHT/C/U or FLTR (Domestic): Tools needed for removing ignition switch A T27 Torx, a small flat blade screwdriver, 7/8 wrench. 1. Remove ...

...remove the IGNITION /LIGHT KEY SWITCH AND FORK LOCK for a 2005 FLHT/C/U or FLTR (Domestic): Tools needed for removing ignition switch A T27 Torx, a small flat blade screwdriver, 7/8 wrench. 1. Remove ...

...remove the IGNITION /LIGHT KEY SWITCH AND FORK LOCK for a 2005 FLHT/C/U or FLTR (Domestic): Tools needed for removing ignition switch A T27 Torx, a small flat blade screwdriver, 7/8 wrench. 1. Remove ...