2001 kawasaki ZX-6R Ninja "pressure" Questions

...from the manual (636) fault code 15. hope it helps?? Atmo- Absolute Atmospheric If the atmospheric pressure sensor system fails 15 spheric Pressure (the signal is out of the usable range, wiring ...

iol pressure lite on kawasaki zx6r f1 changed the oil now seems to be no pressure and the lights on Did you cahnge the filter also? Have you ran the motor to build pressure and fill the oil filter. ...

...internally, (louder noise). This restriction in the flow of exhaust gases is commonly called "back pressure". The back pressure will cause a lack of power and loss of higher revs. Disconnect the ...

...on the end of it. Don't get sloppy with the glue. Quickly insert the key and hold it with a light pressure downward for 30 seconds. Release the pressure and just let it sit for five minutes. Push ...

oil light won't turn off after oil and filter has been changed. Dosent sound good check the oil pressure.

...discharged from the rear of the bike when it gets hot? Also noticed there doesn't seem to be any pressure in the bottle when I open it? Really not sure what to try next. The bike is 1997 so ...

my 636 ninja won't go past 40mph and is really jerky at that speed making it unrideable Sounds like a dirty air filter, or dirt in the carb. Sounds like you left the pipe off the back of ram air ...

...head shake on my b2h modle 636 Without a damper, the only other thing you can do is ensure tire pressure is correct and have a shop fine tune the balancing on both wheels. Tell them to speed ...

Looking for correct tire pressure on 2001 Kaw ZX6R. 120/65 17 AND 180/55 17. Michelin Pilot Tires. Thank you. The maximum PSI will be embossed on the sidewall of each tire. It is probably 45psi. ...

My bike ran fine last year now this spring I have no oil pressure after changing my oil. Why is that? try a new oil pressure sender. other problems could be incorrectly fitted or faulty oil filter, ...