2001 kawasaki ZX-6R Ninja "1" Questions

...and does the bike need to be up right ir on the kick stand The oil level should be in the upper 1/3 of the window when you are done. the bike needs to be straight upright. after you have added

...engines, is mounted transversely in the frame. When sitting on the bike, the cylinders are numbered 1-2-3-4 left to right.Firing Order: the firing order is 1-2-4-3. There is no distributor for the ...

valve adjusting how do i adjust the valves on a 2001 kawasaki zx6r?? You need to take the #1 plug out and make sure the piston is at top dead center. Then make sure that the alignment mark on the ...

how do you time a 1995 600 ninja Turn the engine over by using a 17mm socket or spanner on the crank until the no.1 inlet valve goes down & then comes back up; continue turning until the T mark ...

...IN THE CYLINDER HEAD THE PLUG CAPS COMPLETELY COVER THE HOLE IN THE HEAD THE PLUG SITS IN, (TIP) DO 1 PLUG AT A TIME MAKING SURE YOU REPLACE THE CAP BEFORE YOU DO THE NEXT 1, THIS WAY YOU WONT MIX UP ...

...MAKE SURE the shop warranties (IN WRITING) their work! (I guarantee my 2-cycle race motors for 1 race! PERIOD!) In 35+ years only had 1 break.. it broke the crankshaft end off in the main

ive took spark leads off all are numbered 1-4 but cant remember how they sit in head if you know no 1 try 1342

How many times should i turn the fuel to air screw out on a 1999 zx6. i have it out 2 and a half turns is that the best? Standard is 1 & 1/2 turns out- Using a infra red Gas analyser, I found they