Question about kawasaki KMX 125 Motorcycles
on a 1992 ezgo, 4 cycle gas engine, connecting rod cap bolt I'd just use the standard torque value appropiate for the bolt size. It should be a grade 8 bolt if it's SAE size or grade10.1 if metric
Question about kawasaki KMX 125 Motorcycles
why does the headlight fuse keep blowing after beginning to ride? Obviously it is shortcircuited. Do a thorough electric chek using appropiate testers to check your wiring
Question about kawasaki KMX 125 Motorcycles
...plug in the chrome cover with a 3/8" hex key and refill the transmission with 20-24 ounces of the appropiate lubricant. Good Luck ...
Question about kawasaki KMX 125 Motorcycles
...MOTORCYCLE WITH THE WIRING HARNESS BUTCHERED I NEED A DIAGRAM WITH THE WIRE COLOURS GOING TO THE APPROPIATE PLACES FOR THE REBUILD THIS IS A T200 INVADER MODEL NOT A T350 AND THE YER IS 1969 Hi I ...
Question about kawasaki KMX 125 Motorcycles
...thread bolt with a nylok nut on it. Make sure you "shim" the top motor mount to the frame with the appropiate amount of washers so as not to "torque" the frame. If you do, either the top motor mount ...
...spring and top plug or put it in the triple trees and intstall the top cap. You'll have to put the appropiate amount of the correct weight oil in the tubes. The amount depends on what kind of forks ...
is 60,000km's alot for a 2003 v-rod? Well, let's look at it this way. The bike is six years old so that's 10,000km's a year. Here in the states, that would be 6,200 miles per year which is considered ...
...dat it is nt possible 2 increase da height of da shocker as it is auto-adjustable.plz reccomend da appropiate solution... you have increased the width of the tire only 5mm on the sides, all you need ...
Question about kawasaki KMX 125 Motorcycles
...is not for the novice as its quite complicated and requires a long 1/4 drive extension with the appropiate allen key socket on the end hence the vice to hold it still .You should not need to ...
...your own manifold, you simply need a piece of brass tubing or a nipple that you can drill the appropiated size hole in the intake and install the nipple. If you have your old carb, measure the ...
86 questions posted
Usually answered in minutes!
37 Questions
34 Questions