Question about kawasaki VN 1500 Vulcan Classic Tourer Fi Motorcycles
...1st gear problem!.. My 1996 kawasaki vn1500 classic jumps in 1st gear when pulling away but is ok in all other gears..i've replaced all friction plates and torque limiter springs but this as not ...
Question about kawasaki VN 1500 Vulcan Classic Tourer Fi Motorcycles
...1st gear, and when i try to pull away the engine just fades This means that there is probably a problem with the transmission preventing engine engagement in other gears and/or at given levels of ...
Question about kawasaki VN 1500 Vulcan Classic Tourer Fi Motorcycles
...1st gear it cuts out before i even let the clutch out. but if i put it in 2nd gear it doesnt cut out,, is this because the gearbox oil has leaked to the point there is not enough in there,, or is it ...
Question about kawasaki VN 1500 Vulcan Classic Tourer Fi Motorcycles
1st gear the gear grinds an clunks into fjr 1300 yamaha when engaging 1st gear the gear grinds an clunks into gear is my clutch on its way out? Often the transmission will clunk when first starting up
Question about kawasaki VN 1500 Vulcan Classic Tourer Fi Motorcycles
1st gear Your clutch may be out of adjustment or worn. With the bike not running try putting it in 1st gear while rocking it forwards and backwards. If it goes into 1st gear easilly, check your clutch
Question about kawasaki VN 1500 Vulcan Classic Tourer Fi Motorcycles
...1st gear so getting back to the neutral is a quite tedious affair/impossible task. seems gears stuck between 1st and 2nd. Also bike lurches for only first time when i shift 1st gear. gearshifting is ...
Question about kawasaki VN 1500 Vulcan Classic Tourer Fi Motorcycles
1st gear light, stuck ingear 1st gear light is flashing on display, stuck in gear and cant start it. Normally rocking it back and forth releases gear but wont do it this time. Sounds like the bike has
Question about kawasaki VN 1500 Vulcan Classic Tourer Fi Motorcycles
...gear. Your 1st gear light may be lit, but actually isnt in a ready state. does it only do that when the kickstand is down? if so put your kickstand up before you put it in 1st gear sounds like its ...
...1st gear the gear shift would not move to select another gear, I rode my bike home in 1st ! there were and are no noises. I have stripped and checked the gear change arm and the selector drum all ...
...1st gear pick up speed and begin shifting the foot gear selector up in to 2nd gear and practice closing the throttle and breaking to a safe stop. gears are generslly 1st down 1 click 2345 and6th all ...
66 questions posted
Usually answered in minutes!
239 Questions
197 Questions
175 Questions
157 Questions
126 Questions