2000 kawasaki VN 1500 Vulcan Classic Tourer "goldwing brake problems" Questions

...brake discs are not bent. Check the front wheel bearings have no sideways play. Check the front tyre for uneven wear. Get the wheel and tyre balanced. It may need a new front tyre if all the above ...

...goldwing sit. First bleed the front left brake then bleed the rear brake they both work off the brake pedal. When you are done with that bleed the front right brake with the hand brake lever, Get a ...

...goldwing idle in my driveway for about 15 mins to warm up. When I went to use it the rear brakes were completely locked up. There was no possible way that the bike would move even under power. I had ...

...goldwing front right brake will not blead think does not function brake problem in front remove caliper and install new rebuild kit, flush out old fluid from system. sounds like old fluid and seals ...

...Goldwing SE with 30K miles. I've added lighting to the saddlebag and replaced the rear reflector with a light. I've also converted the saddlebag corner brake lights to turn signal/brake lights. ...

...Goldwing and have been experiencing this for a while. Once my bike warms up, when I apply my brakes, I get a serious vibration, almost like anitlock brakes (which it does not have). It sounds like ...

...GOLDWING SE. I ALSO PUT NEW STOCK BRAKE PADS IN. NOW i GET A CLICKING NOISE THAT GETS LOUDER WHEN I APPLY THE BRAKES. Check to see that your brake rotors are tightly bolted to the rim and also check ...

Goldwing rear brake continued applying pressure after I stopped for a moment, and continued applying pressure until the bike would not move. I have replaced the back brake caliper and bled the lines a

goldwing interstate 1200, it runs fine, but, when i apply the brakes, all the lights dim, i replaced the regulator/ regulator, charged the battery, and still have the same problem, anyone out the have