2000 kawasaki KLX 300 "float stuck" Questions

float is stuck in the bottom of the carb. Remove the bowl, pull out the float and needle valve, and clean the valve and the hole it sits in. Sounds like your floats are stickin in the carb. and or one

...stuck- needle and seat only leak when the engine is turning over. Pull the carb loose and roll over and remove the float bowl. drop the float pin and remove the float and needle. Find the vacuum line ...

...float stuck. 11. Fuel injectors clogged. 12. Fuel injectors stuck open. 13. Quick disconnect check ball stuck. 14. Compression below 75 PSI. 15. A stuck-bent-burnt valve. 16. Severely discharged or a ...

when the engine is running. Is the float stuck? either the float is stuck in the down position or the float needle cannot close properly due to debris in the float valve or a worn float valve assembly

...stuck float right? Yep you got it a stuck float or possibly a plugged main jet, but more likely the float....and probably its not stuck, its probably bad and needs replaced, if there is fuel in the ...

...float is stuck in the closed position. Remove the float bowl on the bottom of the carb and spray carb cleaner at th float needle. Gently lift the float upward then let it drop. Repeat this several ...

stuck (or bad) float. Remove the bottom bowl of the carburetor. Inspect the little plastic float and make sure it's not stuck in place. Make sure that the plug did not come out from the float bracket.

...float is stuck, grab a screwdriver and tap the carb float bowl with the handle. you should be able to see this from the bottom of the tank. hopefully this will unstick the float. if it doesn't, then ...

...stuck float, a stuck float needle, or a worn/bad float needle. Tap on the bowl of the carburetor with the plastic end of a screw driver. This may unstick the float then, a fuel system cleaner like ...

...find an atv category. The float is stuck open. Remove the carb, remove the bowl then clean the carb with spray carb cleaner. sounds like float is sticking in carb,could be a stuck needle or a bad ...