1999 kawasaki VN 1500 Vulcan Classic "change oil" Questions

...oil change. Dirty, gritty oil is causing the clutch plates to grab. Change the oil filter along with the oil. Ride the bike a hundred miles or so then change the oil again. No new filter this time. ...

...didn't do it until i chang my oil ? Did you follow your service manual recommendations for oil changes. Your bike may require two different oils in different locations. Call your service center, ...

...change the oil of an kawasaki vulcan classic 1500 f.i. the oil plug is under the motor also the oil filter is in back under motor just drain oil and take off filter thats easy when you add oil it ...

...change oil on 1996 Kawasaki vulcan 1500 What constitutes a tune up other than changing the plugs? What about filters. The oil set up is odd. No dipstick? Where is filter and drain plug? a complete ...

says ok. Put in ''Sea Foam'' helped some but hasn't stopped. You need to have the valves adjusted. If they are not done soon you will have to replace more parts. Also do a oil change and filter change

and how much? its very difficult to change the oil pork cause it take time to remove the pork and its not easy to unbolt it..so better go to the nearest motocycle repairshop and ask them to change it.

...the oil is not the problem but change it anyway and the filter. The problem is the clutch may need to be replaced or adjusted. Also check gear box for noises there maybe more trouble. Good

Change oil? Can you adjust when the clutch engages/disengages on a hyd. clutch? I've read some about problems with clutch springs on this bike. Where would you suggest I begin (after changing the oil)

2000 lt valve ticking I change the oil and I hear a loud ticking from the rear cylinder. Can oil viscosity make such a change? Check valve clearances.

change my oil pump at a great cost because it was made in plastic. Why was there no recall? I am not a happy customer was left stranded on the road. Kawasaki Canada should help at covering my repaired