1999 kawasaki ZX-6R Ninja "neck bearing" Questions

...it seems to stick when it is in the straight ahead position. i think it may be the bearings in the neck. if it is, how easy is it to get to them so i can replace them. your rest is damage and you ...

...It should but it all depends on the length of the neck. Measure the neck and the bearing tube that goes through the neck. If it;s long enough it should fit and you might have to replace the

neck. One piece bearings are like automotive wheel bearings , It is a cone shaped bearing with a cone shaped race. If you know the dimension of the steering stem and the steering neck inner diameter ,

front end wobble Most front end wobbles on the dyna are from loose neck bearing adjustments or worn bearings in the neck. Also check the front wheel/ rim for trueness

...it was low airpressure in tire but that wasnt it. could it be the bearings in the front frame neck that has a grease fitting? sounds more like front wheel bearings. jack up bike and try to ...

bearing life is common on GL1200 models. You should also consider tightening your steering neck bearings. Loose neck bearings is a common problem on any motorcycles. Disassemble the upper triple clamp

...in a corner it is slightly more pronounced. to really experience the terror in full i hold the handle bars with a slightly open hand . is this neck bearings or what ? not enough neck bearing ...

...neck barrons Remove tripple trees.you may need to use a bearing removal tool, check your races make shure they are good. replace bearings I heat up bearings in oven & put tripple tree in freezer ...

neck bearing races. The bearings had never been maintained, greased, etc. They were so shot it threw the rake/trail out of whack and produced what I call a "death wobble" which started at about 55 mph

How to change steering neck bearings on HD How to change the stearing neck bearings on a Harley Davidson Please, say the model and year, and I think I can help you out. Its kind of a long process ...