1998 kawasaki VN 800 Vulcan Classic "2000 seat" Questions

Ad

Question about kawasaki VN 800 Vulcan Classic Motorcycles

2 Answers

2000 Kawasaki Vulcan 800 Classic. I rode all day with no problems. The next day, the bike began flooding itself. It goes dead at idle and when the clutch is engaged. I am adding some STARTRON additive

Ad

Question about kawasaki VN 800 Vulcan Classic Motorcycles

1 Answer

2000 VN800 seems to be running a little rich and backfiring. Want to check plugs but not sure what all to take loose to get the gas tank off. Remove the seat single bolt at the rear pull the seat back

Ad

Question about kawasaki VN 800 Vulcan Classic Motorcycles

1 Answer

thanks for help so far issue is the rear shock thanks for help so far issue is the rear shock appears to be able to be lowered by about 1/4 inch it looks as if i loosen the bolt then move it down it ...

Question about kawasaki VN 800 Vulcan Classic Motorcycles

1 Answer

2000 XL 1200 or 883 you would slide the seat through the seat strap and then locate the front of the seat on the tab at the frame and push the seat forward until the seat mount at the back of the seat

Question about kawasaki VN 800 Vulcan Classic Motorcycles

1 Answer

...thank you how do i take the seats off a 2000 marauder Insert your key into the locking mechanism on the right hand side of the motorcycle. Turn the key until the latch releases, then pull the seat

Question about kawasaki VN 800 Vulcan Classic Motorcycles

1 Answer

HOW TO REMOVE SEAT FROM A 2000 HONDA CBR600F4 Can you unlock the seat so you can access the seat underside? Remove the hinge pin then seat should release.

Question about kawasaki VN 800 Vulcan Classic Motorcycles

1 Answer

...seat off from the 2000 ultra classic i just purchased to get at the battery? Usually, there is one screw at the rear of the seat that you take out, lift the seat and pull to the rear. That's a stock ...

Question about kawasaki VN 800 Vulcan Classic Motorcycles

2 Answers

Cannot remove the seat Just purchased a 2007 Kawasaki Vulcan 900 Classic. I need to remove the seat. It appears the seat latch is keyed below the seat. Is the key the same for the ignition and the ...

Question about kawasaki VN 800 Vulcan Classic Motorcycles

1 Answer

...seat on my kawasaki voyager 1200 (2000) http://fiche.worldofpowersports.com/wps/Kawasaki_OEM/KawasakiMC.asp?Type=13&A=313&B=59 this link will show you where the bolts are at so you can remove ...

Question about kawasaki VN 800 Vulcan Classic Motorcycles

1 Answer

...2000 electra glide classic. ours the metal prong on the bottom for support at the front broke back from the plastic substance. how can this happen? It sounds like someone tried to pull the seat up ...

Not finding what you are looking for?
1998 kawasaki VN 800 Vulcan Classic Logo

40 questions posted

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Bob G

Level 2 Expert

104 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...