1996 kawasaki VN 1500 Vulcan Classic "need" Questions

soft fornt forks what parts will I be needing the forks do not leak but are very soft and need to repair you will need to put more fork oil in.

I have an oil leak that I need to get fixed. However, since all...or at least most of the oil has drained out, I need to know how many quarts of oil I need to put back into the motor to get it safely ...

I have a 2001 kawasaki drifter 1500. the owners manual says I need to do maintainance to the drive shaft at 15000 miles. It says something about the drive shaft needs to be greased took apart and ...

...bottom of the break assembly on my bike. the disc seems fine however its dirty from the fluid. Do I need to replace the entire assembly or is this a simple fix? At this point there is a lot of fluid ...

I HAVE A KAWASAKI VN 1500 VALCAN 1999. IT BACKFIRES WHEN DECELERATING & CAN'T ADJUST THE IDLE NEED HELP . THANKS JOE Issue with your Timing Advace need to be re-ajuste Carb need tune up also.. ...

jumps out of 1st gear at take off your clutch is in need of ajustment or need clutch work on.

...changed plugs, they was oil fouled. It also has LOTS of blue smoke. any thoughts? hello, you may need to check float in carb, could be sticking or bad, make sure plugs aren wet with gas insted of ...

Lifters on my 2002 Kawasaki Vulcan are making a lot of noise and need to be adjusted. Do I have to remove the engine to do this? not usually,the valves are located on top of the engine,inside a small ...

How do you remove plugs from 1500 vulcan YOU NEED THE SPECIAL FACTORY TOOL SE OR A WOBBLY AND EXTENSION ON A RATCHET REMOVE SEAT COME IN FROM BETWEEN THE FRAME SEAT ARE AND GO FOR IT AND FROM THE ...