revs badley between gears when i change gear the bike revs like mad its a 1992 KAWASAKI ZEPHYR ZR750 is there 2 cables at the throttle grip if so one being accel the other decel these need to be ...
zephyr wont pull off my zephyr 750 has developed a problem as soon as i put it in gear and let the clutch out it stalls i have changed the spark plugs but no joy it starts first time every time ,when ...
Question about kawasaki Zephyr 750 Motorcycles
the clutch is not releasing, the bike goes in and out of gear but can not pull off, change clutch cable maybe.
Question about kawasaki Zephyr 750 Motorcycles
...Honda XR250 incomplete bike, was told by owner that it may have the wrong clutch because the small gear on the back of the clutch basket does not mesh with the idle gear between the kickstart and ...
slippage in second gear,pulls fine in all other gears and shifts fine,feels like broken tooth off gear or something of that nature A broken gear tooth will cause a clicking sound. Start out in 2nd ...
Question about kawasaki Zephyr 750 Motorcycles
what is the gear ratios on a 1990 heritage soft tail 5 speed Here are the stock gear ratios: Gear Ratio (1): 10.11 Gear Ratio (2): 6.96 Gear Ratio (3): 4.95 Gear Ratio (4): 3.86 Gear Ratio (5): 3.15 I
Question about kawasaki Zephyr 750 Motorcycles
engaging 1st gear the gear grinds an clunks into fjr 1300 yamaha when engaging 1st gear the gear grinds an clunks into gear is my clutch on its way out? Often the transmission will clunk when first ...
Question about kawasaki Zephyr 750 Motorcycles
I have a 1984 honda vf1000 motorcycle and 2nd gear is going do I have to replace all the gears or just 2nd gear Replace gears in sets, the bad gear and the gear it meshes with. In what way is 2nd gear
When i stick my bike into forst gear, the clutch judders and vibrates like the gears are grinding together, ive taken the clutch off, replaced tge clutch and all it does is make loads of noise and no ...
Question about kawasaki Zephyr 750 Motorcycles
unable to change down gear. gear lever stays down i have a kawasaki z1000 on an 03 plate. it wont let me change down gear. sometimes lets me change down a couple then the gear lever stays down so i ...
16 questions posted
Usually answered in minutes!
29 Questions
4 Questions
3 Questions
2 Questions
0 Questions