1991 kawasaki Zephyr 750 "turn signals" Questions

turn signals Turn signals do not work ... all bulbs are good. What to do? If you don't get any of the indicator's to flash is most likely to be the indicator's relay. Take the left side cover panel on

2005 harley deuce left turn signal flashing when ignition turned on when i turn the ignition switch on the left turn signal starts to flash. it will not turn off by pushing the left turn signal button

...Turn signals will flash 3 times. Current PIN will appear in the odometer. The first digit will be flashing. TO ENTER NEW PIN: 5. Enter first digit (a) of the new PIN by pressing left turn signal (a) ...

...turn signals to bullet signals, new ones won't flash. Your bike is equipped with a turn signal microprocessor to make the "cancelling turn signals" work. It is very sensitive to the resistance of ...

...turn signals. Once you press a turn signal button, the turn signal controller activates the signal for specific lenght of time then it cancells the signal. There is a wire that comes out of the plug ...

...turn signals. (security light should flash rapidly) 3. Press left turn signal button 3 times (the 1st "3" of the PIN). Press right turn signal button 1 time (to "set" the code number). 4. Press left ...

...turn signals flash 3 times Press LEFT turn signal switch ONCE. TROUBLE CODES WILL NOW BE DISPLAYED TO CLEAR ANY CODES,,,=> PRESS & HOLD LEFT signal switch for 5 seconds. => turn signal will ...

...turn signals.Operate the turn signal switch both ways.If the fuse blows, the problem can be with the switch shorting out.No blow - plug in one signal and use the switch again. No blow - leave it ...

Turn Signals Right turn signal indicator comes on but turn signals do not flash, when the left turn signal is on the indicator does not come on and I get no turn signals. Headlights ans taillights ...

...turn signals. A white tracer on the front turn signal wire is for the running light. It is possible that a replacement turn signal may not have the same wire colors as the original. You can use the ...