1990 kawasaki ZXR 400 "sea foam gas treatment" Questions

...sea foam in fuel as initial treatment. And using Stabil fuel additive on regular basis will eliminate the problem,if in fact it has to do with fuel or valves sticking. I am not expert on this engine ...

...gas tank to unstick a sticking float in a motorcycle? I've put sea foam in the tank. Is there anything better than sea foam ? Berryman Products Yes try 44K from BG, usually you can purchase it at ...

...sea foam and add heat fuel treatment or something like it will freshen gas up and clean fuel system with sea foam but add that after started and watch how hot it gets might smoke a bit with carbon ...

...sea foam treatment and was run for about 30 miles but it still will not idle down Sounds like you have a clogged jet. remove carbs and jets and clean. and DO NOT I REPEAT DO NOT use sea foam. It ...

...often do you ride? Ethanol gas can cause problems on any fuel system if it sits unused for a long period of time.If this is the case I suggest using Sea Foam additive, best stuff since sliced

What is left to do. thanks Clean your fuel system with seafoam for starters... Sea Foam Motor Treatment I used to have that same exact bike when I was a kid but I can't remember how many carbs it had?

sea foam and that may clean the end of the needle off the way it works when the bowl of the carb fills with gas the float raises a needle valve into a brass seat and stops fuel flow into the carb fuel

...sea foam but it does not help. wife is starting to get a little fired up unhappy wife unhappy home any help would be greatly appreicated. If the bike ran fine prior to putting it in storage and all ...

SEA FOAM in it. The idea here is to run the bike with Sea Foam for a good long time to try to clean out the carbs. There will never be any comparison to pulling the carb rack from the bike and tearing