2008 Husqvarna WR 250 "gears pedal bike work" Questions

Ad

Question about Husqvarna WR 250 Motorcycles

1 Answer

...gears. can anyone recomend after market lever or swival pegs etc that will suite husky or a modification. can anyone help with suspension set up, factory setup a bit stiff, i weigh 85kg, with gear, ...

Ad

Question about Husqvarna WR 250 Motorcycles

1 Answer

...pedal moves but bike wont go into gear. pedal is reaaly lose and ideas? the pedal got caught on a gate an was ripped down which has caused the problem. pedal feels like it has been stripped on the ...

Ad

Question about Husqvarna WR 250 Motorcycles

1 Answer

...pedal is hard to shift up and/or down, the bike has a bent shift fork. Installing a new shift fork is major surgery on the bike. The repair is not recommended for the novice. Additionally, some ...

Question about Husqvarna WR 250 Motorcycles

1 Answer

...bike but for the most part they are all alike. There should be a small bolt on the end of the shift pedal. Tighten it up; it probably requires a 10mm wrench. Some bikes will have a linkage at the end ...

Question about Husqvarna WR 250 Motorcycles

1 Answer

...bike shifts to neutral is your toe under the shift lever or on top? If toe is under the lever then loosen the shifter lock nut and raise the front of the pedal two notches. If your toe is under the ...

Question about Husqvarna WR 250 Motorcycles

1 Answer

...gears. A rattling noise occurs. When full engagement happens you get the bucking. As time goes by, the shifting pedal will get harder and harder to shift. Then you simply can't get it into or out ...

Question about Husqvarna WR 250 Motorcycles

1 Answer

...'92 FLHTP.Yet all of the other gears work great while upshifting or downshifting on the road.Any suggestions? thanks Catfish. Fix the pedal of the gearbox...or adjust the sinccronise in the

...pedal doesn't give the feeling of "passing through neutral" when I shift. The other indicator lights all work. Thanks Being a Harley, look for the broken wires. Buy a shopmanual for that model at ...

Question about Husqvarna WR 250 Motorcycles

1 Answer

bike start without the clutch pulled in? if so replace the clutch safety switch, most common cause of the Cruise not working, Remember that you must be in 5th gear, clutch & break levers out, foot

I Jammed the kick start by kicking it when it wasnt on the stand electric start clicking Not sure how kickstarting on or off the stand can make a difference and it shouldn't have jammed either way. My

Not finding what you are looking for?
2008 Husqvarna WR 250 Logo

6 questions posted

Ask a Question

Usually answered in minutes!

Top Husqvarna Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66967 Answers

Are you a Husqvarna Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...