...you confirm? also, how to replace? start relay should be checked, if cables are loose or corroded they do not deliver enough power.if jumping the start relay will engage the starter replace the
Starter relay, solenoid, starter motor or circuit wiring faulty. 11. Starter armature or field coils have failed. 12. Main fuse or circuit breaker may be blown or faulty. 13. Faulty ignition relay. 14
Question about Honda VTX 1300 R Motorcycles
...starter relay? It is a flat fuse (30a) and plugs into the top of the starter solenoid. There should be a spare fuse on the rubber solenoid mount. The neck bearinds on these model Hondas are known to ...
...starter relay and still no starter action there is no power coming from the relay to the starter but the positive lead from the battery to the starter relay has 11.98 volts. 2001 660 grizzly ...
Question about Honda VTX 1300 R Motorcycles
...starter relay and stater in yamaha 1100 2001 v star replaced starter relay and stater and battery in yamaha 1100 and the relay clicks but won;t engage the starter . Charge battery to full, start in ...
Question about Honda VTX 1300 R Motorcycles
relay are faulty; if even jumping the terminals, the starter motor will not turn, then it wold be a defective starter motor, most likely the carbon brushes. Good luck and thank you for using FixYa. Hi
...replace the starter relay. To confirm a faulty starter relay, short the 2 big terminals (on the nuts, not on the threaded stud) when the click is heard. Expect a big spark. If the starter ...
...starter relay same problem, neutral light on, full charge relay snaps loudly thats it, help?? yamaha atv not listed on motorcycle model Check fuses. Check voltage. Could be a burned, or just broken ...
...starter relay, battery, diod, and elec relay...cleaned and tightened all of the electrical connections including the battery ground and cleaned out the starter. The kickstand safety, kill switch, ...
...loop closes. Wondering if the new starter relay could be bad or if there may be another problem REPLACE WIRE AND CDI FUSE ETC DISCONNECT ALL WIRE TERMINALS BATTERY ETC THEN RECONNECT TO RESET
217 questions posted
Usually answered in minutes!
188 Questions
186 Questions
195 Questions
151 Questions
131 Questions