2005 Honda VTX 1300 R "key turn remove" Questions

...Turn the key clockwise and remove the rear seat. Now turn the key anti clockwise and remove the front seat. If it doesn't release, just put a bit of pressure on the rear of the seat (or bang it with ...

...turn the key about 60 degrees to the left and the ignition switch will pull out. To install it, do not change the position of any internal components just push the ignition switch back in and holding ...

...turn the key about 60 degrees to the left (counterclockwise). Insert the switch into the housing and hold the switch so it does not turn then turn the key to the right until the removal tab pops

...so hard that the key will be hard to get out. If so turn the wheel hard to left and try to remove the key at the same time. Repeat this for the right also. It has worked for me a lot. Hope this

turn the key about 60 degrees in the switch without turning the switch), remove the two screws (one on each side) of the housing, remove the ignition switch housing nut then with the handlebars turned

...screwdriver (the tab is to the lower left under the knob) and while pressing down on the key, turn the key counterclockwise about 60 degrees. At that point the switch will pull out of the

...rider's handbook. There is a key hole near the left passenger foot peg. Insert ignition key, turn clock-wise (if difficult to turn, press down on the passenger seat while turning to relieve

...way unlocks your seat. Turn key in seat release / helmet lock, pull down black lever on inside of lock (behind the lock, out of sight). It works for VFR800Fi 1998. Maybe you can have a try.Honda ...

How to remove ignition key from my KAwasaki C14 Ignition key is stuck can't remove it check your steering head lock.. and push the key in when turning it to remove Hope this helps Ken

...OEM parts for Yamaha http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals turn key other way or insert back on tank turn then turn key ...