2005 Honda VT 750 Shadow Aero "slow jet" Questions

pulled all the way out idle screw adjustment has no effect Take the carburetors apart and clean the slow jets and fuel passageways in the carb bodies. Then bike should idle with out choke

...start after putting Vance & Hines Pipes, then try to sync the carbs, if not possible (meaning turning the sync screw all the way and cant sync them), reJet the carbs with 1up, slow and main

...slow jets, get the factory kein jets. Hope this helps. I forgot to mention, the popping is in the slow circuit, that is why I recommend upping your slow jet to a 48, this will take care of your ...

...stock? Manual says - VT 1100 88-96 main Jet both nr.165, slow Jet 42 For VT C2 and 1100T main front 175, rear 180 , slow 42 For 97 main both 178 , slow 42 You can read Nr. on Jets, they are ...

...slow jet and idle the engine up a bit. The idle speed screw is located at the top of the carb towards the front of the bike. You may have to take the air filter cover off to get to it. Changing the ...

run with choke out but will die as soon as i give it gas. tried new gas and seafoam? take your carbs off and clean them concentrating on the slow jets and the slow jet passageway through the carb body

Jetting Just need Stock jetting for this bike main jet = #165 slow jet = #42

how to tell if jets are the ones when bought new How can I tell if the jets are original jets when bought new ? do they have a number on them Yes, they have a numbers, slow jet 45-55, main one 120-150

...slow running jets (brass),clean the two jets with an air jet, make sure you can see through the jets. reassmble every thing, and see if all is OK, if not you may need to adjust the slow running screw ...

...carb adjustnent. STARTS WITH CHOKE ON THEN IDLES HIGH WITH CHOKE OFF YHEN DIES Take your carburetor apart and clean it. Paying close attention to the slow jet and slow jet passageway through the