gear, bike stops. Is this a simple cable adjustment? If so. do I adjust at handle end or at clutch end? Thanks. Adjustment is made at clutch end first and then fine-tuned at the handle bar end. Adjust
Question about Honda VT 750 Shadow Aero Motorcycles
gear it stall every time .I changed the clutch cable before I stored it and adjusted it was working fine what could be the problem is there a safety switch? Yes, there IS a clutch safety switch. http:
...cable adjustment at the clutch lever untill it will go into gear and pull off without slipping, and stay neutral when pulled.not creep or jump when clutch is pulled. Right now sounds like cable is a ...
...cable harness at "BOTH" ends. 4. Failed main circuit breaker or ignition switch, check for loose connections and continuity. 5. Failed system and or ignition relay, check for continuity. 6. Failed ...
Question about Honda VT 750 Shadow Aero Motorcycles
...adjust the clutch cable back out until you get a freeplay of about an 1/8 inch at the lever. The clutch should be adjusted well enough to release at this point. If it doesn't, the clutch plates are ...
Question about Motorcycles
...any other gear. I start the bike pull in the clutch shift to first and it takes off ????? sounds like the adjustment is not right clutch cable needs to be adjusted more as it is not disengaging ...
Question about Honda VT 750 Shadow Aero Motorcycles
...gear You may want to make sure the clutch cable is properly adjusted. At the clutch lever on the handlebars, pull back the rubber cover over the end of the cable where it goes into the lever. You'll ...
Question about Honda VT 750 Shadow Aero Motorcycles
...what is wrong and how to fix it? @ Loosen the handle bar adjustment a lot, .then take a little slack out of the cable at the engine connection, then re-adjust the handlebar lever with a bout 1/8" ...
Question about Honda VT 750 Shadow Aero Motorcycles
...is off and in gear with clutch engaged the bike does not move. Can anybody help me... hi mate adjust the clutch cable when you put it into gears the clutch is still grabbing so it needs to be ...
...gear it cuts out your clutch is draging adjust the clutch cable so that when you are on the bike with the bike off and in gear and clutch pulled in you can move the bike freely that means the clutch ...
196 questions posted
Usually answered in minutes!
188 Questions
186 Questions
195 Questions
148 Questions
151 Questions