Question about Honda VT 600 CD Shadow Motorcycles
Where is the idle screw, air/fuel adjustment screw on a VT750Cd On my 2001 Honda i can not find the adjustment screws for the idle or the air/fuel. we opened up the air flow into the bike but now it ...
Question about Honda VT 600 CD Shadow Motorcycles
how do i adjust the idol on a 2005 honda shadow 600 Should be a black knob right near carb, if not it is the flathead screw on the side of the carb slide body.
bike wants to backfire and pops when driveing it clean and adjust ur spark plug, if it is worn out, buy a factory spec plug!
Question about Honda VT 600 CD Shadow Motorcycles
I have a 1986 Honda Aero 50. It starts and runs, but when it is stopped, it dies. Someone mentioned adjusting the idle screw. How do I do that? The long screw sticking out of the throat of the carb is
Question about Honda VT 600 CD Shadow Motorcycles
honda vlx 600 seems to be running rich,took out a plug and is damp with gas. How do i adjust carb to fix the problem? There are two set screws on the throat of the intake. One is the high side and the
Towing the bike with a cradle Hi there, I'm moving from VA to CO (26 hr - over two days) in my Jeep Cherokee 2000. I'll be towing my '04 Honda Shadow 600 with a towing cradle in a 5th wheel set-up. ...
Question about Honda VT 600 CD Shadow Motorcycles
2004 VT600 AND HAVE A PROBLEM WITH THE CLUTCH I HAVE A 2004 VT600 AND HAVE A PROBLEM WITH THE CLUTCH. THE CABLE WORKS OK BUT IT HAS TROUBLE GOING INTO GEAR OR STAYING IN GEAR, IS A CLUTCH REPLACEMENT ...
Question about Honda VT 600 CD Shadow Motorcycles
Adjust clutch on 2003 Yamaha V-Star 1100 Classic Adjusting the Clutch Cable - Lower End Loosen the adjustment at the clutch lever Remove: - Left Side Cover - Clutch Adjusting Cover Loosen the locknut ...
clutch adjustment 1993 harley davidson To adjust the clutch on your Fat Boy, find the cable adjuster in the clutch cable. It's usually covered by a rubber bellows type cover. Slide the cover off the ...
need clutch rod adjustment Slide the rubber boot away from the clutch cable adjuster. Loosen the cable locknut and turn the adjuster to provide as much cable slack at the clutch lever as possible. ...
24 questions posted
Usually answered in minutes!
50 Questions
10 Questions
8 Questions