Question about Honda VT 600 C Shadow Motorcycles
...wheel and tell them what your looking to improve on,they should give you the best advice on that particular bike since all bikes have differant power ranges.also 1 tooth on front sprocket is eqaul to ...
gt;< pull out axel lift chain or belt off the rear drive and have friend get you a beer. Thats how I do it. i have a flat tire on my front of a 2001 honda shadow 600 vlx how do i take the wheel off
...front wheel check: 1. Steering, front forks and head bearings 2. Front brake and wheel bearings 3. Wheel and tyre condition. d) Lower front wheel and go to right side of vehicle and check: 1. Frame, ...
Front wheel question Does the AE have one or two spacers on the front wheel Was kind of in a hurry taking front wheel off this afternoon for a tire change and went to the bike shop where they pointed ...
Front wheel question Does the stroke have one or two spacers on the front wheel Was kind of in a hurry taking front wheel off this afternoon for a tire change and went to the bike shop where they ...
...wheel line up with the back Straight the front wheel and adjust the nut connected to rear axis by seeing the front wheel behind rear, when you cant see front wheel, it will align with rear
...front wheel bearing Just had fitted new front wheel bearings and when I put the wheel back on the bike and tighten the axle to the recommended torque the wheel locks. either your front wheel bearings ...
Question about Honda VT 600 C Shadow Motorcycles
...wheel and tire sizes front and rear for my 99 1200 sportster? Fitment for 1999 XL Tubeless Cast Wheels: Wheel Position and size = 19 inch Front; Rim Size and Contour = T19x 2.15 MT; Rim Valve Hole ...
Question about Honda VT 600 C Shadow Motorcycles
...front wheel of my Suzuki FXR150 2001 i have a puncture in my front wheel of my Suzuki FXR150 2001 and i need to know how to take the front tire off the bike Lift the front wheel, use jack or put ...
Question about Honda VT 600 C Shadow Motorcycles
front wheel Can?t say for sure but I think it's a 12mm. It?s a long time since I worked on one of those. If you have an old 8mm bolt the hex on it is usually 12mm. You could try that to see if it fits
31 questions posted
Usually answered in minutes!
51 Questions
53 Questions
41 Questions
44 Questions
27 Questions