2005 Honda CRF 250 X "putting oil" Questions

...putting it away.. put it in a heated hsowrrom all winter. it always had starting prooblems though.. i ust recently changed the engine oil and oil filter and it stilll takes me like 20 mins to start? ...

hi, Ive just done a complete rebuild on my crf250 (06) put a new crank, con rod the works, when i put the cases back together the oil pump wont turn, its not that I'm over tighting the bolts or got ...

hot start lever siezed in plunger of crf 250 x carburettor cant seem to remove cable from either end to drop the carb,not enough slack to do much more than dose the spring with oil,working the cable ...

sunk 06 crf 250x in about 3ft of water? drained water out of airbox,changed plug, changed motor oil/lots of water in oil. not sure if i did enough, is it ok to start bike or do i need to do moor. ...

Drove honda crf 70f through water now won't start Drove honda crf 70f through water now won't start First take off air filter then dry it.Secondly take off the carb you have to to drain ...

I broke the timing chain in my 07 honda 400 ex and me and my dad tore it down and it had been smoking and burning oil so we replaced the timing chain the thre bottom gears the piston and rings with ...

putting in full sythetic oil but dont know how much to put in. please help thanks the oil capacity is about 3.8 liters here is a guide for oil changing http://www.paulstravelpictures.com/Yamaha-YZF-R6

how much oil do i put in Normally the oil from the engine drained should be the same as the oil put in. For example; oil drained = 1 quart, then the new oil put in should be 1 quart.

oil filter New to 4-strokes and just wondering if you need to put oil on the oil filter before you put it in or do you just leave it dry? i always just put some on the o-ring before i put it back ...

oil filter New to 4-strokes and just wondering if you need to put oil on the oil filter before you put it in or do you just leave it dry? i always just put some on the o-ring before i put it back ...