...2 year before. There is regular services & oil changing. But the delear is confirmed that the Clutch Belt & spring is damaged & it needs to be replaced. Kindly confirm the life of the ...
...belt. 2. Now you need to finf the "tight spot" on the belt. do this by measuring the belt deflection at 4 different spots on the belt as you rotate the rear wheel. 3. Place a mark at the tightest ...
Question about Honda Activa Motorcycles
...2 beforhand and if it was turned off for a few mins it would come back to like. although my guages were whacky and there was a ticking noise on the right side of motor Your starter is messed up, ...
...belt tension in mind too. This system works for most but using the setup that I have, the measurement is much more fine/accurate in that you are extending the rods to the front wheel and turning the ...
...belt up according to specifications in the service manual or owner's manual. Usually that's 1/2" deflection midways of either the upper or lower run with a 10 foot pounds of pressure applied ...
178 questions posted
Usually answered in minutes!
188 Questions
186 Questions
195 Questions
148 Questions
151 Questions
