Question about Honda CBR 1000 RR Fireblade Motorcycles
...their transponder passwords, which is prolly true. Dealership will tell you Barrel, and ecu need be changed with new set of keys and tank/passenger seat locks which will run you $1400+. In principal, ...
Question about Honda CBR 1000 RR Fireblade Motorcycles
fit the ignition and the saddle bags? Find a Yamaha agent and yes the same key fits. If your locks have not been changed ,then the same key should fit all the locks on the motorcycle. All of the locks
...fit the fork lock, should I have recieved a third key? Considering the age of the bike, there may have been a lock change at some stage (especially fuel cap) however a second key should be for the ...
...not ignition I managed to get old Honda key to turn ignition on so worst case is barrel and key for ignition but as maybe my barrel may have ben changed the key should fit ignition as my klr 250 ...
Question about Honda CBR 1000 RR Fireblade Motorcycles
...lock, the tumblers of the ignition, and on the underside of the gas cap. It is a six digit code the last three of which are the code( xxxA56). If you take a 10 mm socket and a long extension you can ...
Question about Honda CBR 1000 RR Fireblade Motorcycles
...lock up hence the stopping. Don't rely on a oil injection setup either. It could cost you the motor. Usually with bad seals and cracks in the intake boots the engine revvs up really high without you ...
code) can be removed and fitted to a different key body if motorcycle locks and ignition switch are changed; - it is recommended the red key be used only for programming the immobilise system. Use the
...change the voltage regulator on a 2002 harley ultra classic can you take me through the stepes to do it First disconnect the battery negative post. Then, unplug the two wires that run from the ...
98 questions posted
Usually answered in minutes!
50 Questions
44 Questions
45 Questions
5 Questions