Question about Honda VT 1100 C2 Shadow Sabre Motorcycles
...earth/ground - remove the lense covers and clean the bulb panel contacts also check the brake and indicator switches for rust on the contacts, Hope this ...
Question about Honda VT 1100 C2 Shadow Sabre Motorcycles
switch. Not even an high beam indicator light...so I tried the start button and nothing happened at all. Everything else works and all the fuses check out ok. Any thoughts??? try cleaning your battery
Question about Honda VT 1100 C2 Shadow Sabre Motorcycles
...switch) The gear position indicator displays "- -" to indicate the system enters the intial setting mode. If more than 5 seconds elapse or the procedures are incorrect, The "N" stops blinking and ...
Question about Honda VT 1100 C2 Shadow Sabre Motorcycles
...indicator switch on the transmission is bad. Look at the chrome cover on top of the transmission on the right hand side of the bike. There is a switch with two wires running to it. One wire is a ...
Question about Honda VT 1100 C2 Shadow Sabre Motorcycles
...indicator switch doesnt work reliably My 87 k100rt bmw left hand indicator switch doesnt always activate the indiactor, right hand and hazard works fine. I have test continuity across switch and that ...
Question about Honda VT 1100 C2 Shadow Sabre Motorcycles
...indicator switch is mounted in the right-hand crankcase directly forward of the main drive gear shaft and behind the forward belt pulley. To access the switch, you must remove the front belt pulley ...
...indicator switch from right to left as I exited the roundabout I ended up with all 4 indicators flashing like hazard lights and I was unable to switch them off. Can anyone help? That sounds like your ...
Question about Honda VT 1100 C2 Shadow Sabre Motorcycles
...indicator switch. Keep in mind that the switch has a spring loaded ball that simply falls into a "notch" on the shifter cam. Sometimes this shifter cam is not exactly lined up with the ball even ...
Question about Honda VT 1100 C2 Shadow Sabre Motorcycles
...indicator switch. The switch has a single input (voltage from the flasher) that may be routed by the switch one of two directions - the two left turn indicator lights OR the two right turn indicator ...
...switch the indicator off the dash boots back up again and runs as normal ANY HELP WOULD BE APPRECIATED! Hi,,it sounds like a wire in the indicator circuit is shorting out somewhere,,,for starters ...
49 questions posted
Usually answered in minutes!
138 Questions
91 Questions
77 Questions
69 Questions
32 Questions