...valve clearence, valves to tight, i have a yz450 you need a shim kit to adjust valves Find a mechanic who knows how to use a compression leakdown tester. No other work should be performed until after ...
Question about Honda CRF 450 R Motorcycles
Valve clearence ' ,How to adjust it. "Valve Clearance" refers to the small gap between the valve lifter and the valve stem that allows the valve to completely close. Remove the Valve Cover and set the
Question about Honda CRF 450 R Motorcycles
valve clearence and adjust the valves??? how do you check and adjust the valves??? the owners manual says to inspect the valve clearence but dosent tell you how. side note: is there anything (like any
Question about Honda CRF 450 R Motorcycles
I have a 1985 honda 450 i kinow how to adjust the valves just dont know the proper clearence hi with a cold engine valve clearence shiuld be: 0,08 mm -inlet 0,10 mm exaust good luck
...the repair manual. Search it over the web or buy it. To set the valve clearence is more than knowing the clearence itself. The procedure should be described very well in the manual. Is worth have
Question about Honda CRF 450 R Motorcycles
...Valve clearence is to tight, compression then becomes zero when hot and when cooled down again compression is back. Adjust clearence maybe 0.05 mm more up, but check all valves an all cylinders. You ...
valve adjustment hi, are you saying since you addjusted the valve clearences the bike wont start? re check make sure you had the engine on the correct stroke, remove spark plug, check piston is at tdc
Question about Motorcycles
i need to adjust the valves on a 2002 club car kawasaki gas engine valve adjustment specs you can check the net for valves clearences inlet;exaust.to be really exact.need to know the motor you have
valve clearence The valve lash adjustments on these bikes are done with shims on a COLD engine. Intake valves 0.15-0.20 Exhaust valves 0.22-.0.27 Check the specs on your emissions sticker to confirm..
...You need to adjust your decompression valve. You have to pull your tank off and your valve cover. The manual shows the cam position you need to be at to adjust the clearence. The clearence is ...
64 questions posted
Usually answered in minutes!
125 Questions
63 Questions
50 Questions
4 Questions
6 Questions