2003 Honda XL 125 V Varadero "remove rear seat" Questions

...Remove the bolt and shove the tank to the rear of the bike about 2 inches to clear the rubber mounts, then lift upward. See diagram. I haven't worked on any newer 125s but if the picture in the ...

...rear fender Remove bolts holding down the rear seat . Remove seat and then remove two bolts, at the rear, holding the front seat on. Unlock lever on side of seat. Seat then pivots on two hinges to ...

...remove rear seat on my 2004 Intruder 800 Can not remove the rear seat. I take it you have removed the rear bolt holing the rear of the rear seat to the body of the bike. The rear seat is then pulled ...

...remove seats Lift the rear of the passenger seat's cushion to find the screw that secures the seat to the rear fender. Use a 5-mm Allen wrench to remove the screw. Lift the rear of the passenger seat ...

...remove the rear section first) go to the rear fender center and remove the single bolt there securing the rear seat section - gently lift up and to the rear and the seat will come off then gently ...

...remove the screw from the seat hinge at the front of the seat, raise the rear of the seat only slightly during removal or installation because pivoting the rear of the seat up too high can cause the ...

...remove the rear seat of a Yamaha Virago 250? the nuts for the bolts located below the rear fender do not fit in a torque wrench... The rear seat is held in place with a single bolt near the rear of ...

...the rear seat has a bolt in the cream color tab at the front of the seat, remove bolt and lift up and slide seat forward or remove the rear portion from its retaining piece at the rear. Good luck - ...

...remove the rear seat the lock is on the lefthand side, rear,underside, once removed you may find a 10mm bolt at the rear of the front seat, underneath the rear seat, undo this and remove the metal ...