2003 Honda XR 125 L "remove fit starter motor" Questions

...to short start at the solenoid switch by connecting wth a screw driver the two points and see if the starter will run, if not thn you will have to remove the starter and overhaul it. Hope this

...starter motor was removed prior to me getting the bike to fix The most likely answer here is that the wiring to the actual starter motor is wired the wrong way around. Check all of the wiring and the ...

...still makes clicking noise starter motor not turning gave it a tap and it started turned bike off then tried again and nothing sounds like the brushes in starter motor remove and bring to starter ...

...fit back together correctly. On the other side of the bike, remove the exhaust system and anything else that is in the way of removing the starter. Take the large cable off of the starter and the two ...

Starter Motor removal and replacement. The Bendix type is similar but fatter. Disconnect battery! Remove the fat battery lead from the side if the motor and hold out of the way. Remove the nut holding

...remove your starter motor & test it on the bench/floor.Secure the starter motor.In a vice is best but on the floor with your foot firmlly on it will do. Using jumper leads conect it to your ...

...Remove the spark plug. 3. Turn the motor using the starter motor or kick starter. 4. check for spark by inserting a new plug into the plug cap. (make sure the plug is grounded). If the motor turns ...

...remove the starter, disassemble it, and get it back on your bike, you can save some money. But, it you're going to have to pay someone to do it, you'd probably be better off to just purchase a new ...

...battery 2# disconnect the starter connection wires ,,negative and positive from the starter motor itself.....3# unbolt your starter motor ....And repeat these steps in reverse to fit your new ...