Question about Honda VT 1100 C2 Shadow Sabre Motorcycles
What is the torque for the cylinder head bolts on a 97 honda vt1100c2 shadow? 65 foot pounds
...pounds of torque. 3. Mark each head bolt and head with aligning marks. Tighten each bolt 1/4 turn (90 degrees). Cylinder Head Bolt Installation Torque Wrench Method For each cylinder head, start with ...
Question about Honda VT 1100 C2 Shadow Sabre Motorcycles
...head bolts must be torqued in a particular sequence. The head bolts are labeled #1, 2, 3, & 4 in the drawings, not literally. The front head bolts are numbered differently from the rear as well. ...
Question about Honda VT 1100 C2 Shadow Sabre Motorcycles
...head bolts on my 2001 V92C? 10mm nuts are 40 foot pounds. 8mm nuts are 18 foot pounds. You need to torque all the nuts to 10 foot pounds to start, then torque the 10mm nuts to 20 foot pounds, then 30 ...
Question about Honda VT 1100 C2 Shadow Sabre Motorcycles
...15-18 ft-lbs 1/4" bolts 10-13 ft-lbs The 5/16" bolts torque to 15-18 foot pounds. The 1/4" bolts torque to 10-13" foot pounds. The socket head bolts on the upper cover torque to 80-110 inch
...tight I torque the crank case halves. Tighten the 8mm threaded bolts with the 12' or 13mm head bolts, or nuts, between 12 and 16 foot pounds, and the 6 mm bolts with the 10 mm head 6 to 8 foot ...
Question about Harley Davidson Motorcycles
...all that is needed except on heads. When tightening head bolts it is important to follow manufacturers specifications. Other fastener specs may be found here; ...
Question about Honda VT 1100 C2 Shadow Sabre Motorcycles
torque specs on a suzuki vz800 head bolts 2000 suzuki marauder vz800 Changing rings in head need to know the foot pound pressure on 14mm head bolt and on 10mm head bolt?
...head of a RM 125 Suzuki dirt bike .. 1998 If you can give me the diameter of the bolt, not the cap. And the grade marking on the cap of the bolt, I can give you the foot pounds torque for that ...
...head bolts tighten in sequence to 22 Foot pounds, then loosen up and re-tighten to the same 22 ft lbs. This is the service manual procedure. Bolt pattern shown below. Please rate my answer.
107 questions posted
Usually answered in minutes!
138 Questions
91 Questions
69 Questions
36 Questions
32 Questions