2002 Honda CBR 954 RR Fireblade "changing oil pan seal" Questions

Ad

Question about Honda CBR 954 RR Fireblade Motorcycles

2 Answers

...oil pan has gotten rounded. i need to replace this pluc/bolt before it gets completely stripped. i was wondering what size bolt to buy as a replacement. If you take the bolt to a bolt shop they can ...

Ad

Question about Honda CBR 954 RR Fireblade Motorcycles

1 Answer

...oil fowling a perfectly good air filter. Place a clean pan under the drain plug and without completely removing the plug bleed out enough oil to get the correct level in the bike. Then, save the oil ...

Ad

...fix!). Do this Before changing your oil filter and refilling the oil. The bike needs to be fully upright to do an oil change so make sure it is securely mounted on a bike lift or a pit lane

Question about Honda CBR 954 RR Fireblade Motorcycles

1 Answer

...oil pan and is not put back on or replaced. Typically there is a soft copper or aluminum sealing washer that gets squished by the bolt when you tighten it.That is what actually keeps the oil from ...

Question about Honda CBR 954 RR Fireblade Motorcycles

1 Answer

...oil change). Place the pan under the drain plug and remove using a six point socket. Inspect the aluminum washer if it looks like a normal washer re use it. If it is deformed replace it.Put the drain ...

Question about Honda CBR 954 RR Fireblade Motorcycles

1 Answer

front of the oil pan facing the front of the bike. It is a 5/8 hex bolt with a 1/4 Allen in the center. Make sure u replace the oring part number 11105 and seal the threads with tephlon liquid or tape

Question about Honda CBR 954 RR Fireblade Motorcycles

1 Answer

...pan under the oil filter cover under the front right corner of the machine. Using a six point socket loosen the filter cover bolt and remove the cover. Dump out the oil in the cover being careful to ...

Question about Honda CBR 954 RR Fireblade Motorcycles

1 Answer

...pan. Change the oil filter also. Put a film of oil on the rubber seal when installing. FYI > Go to the site below where you can see a parts diagram for your specific bike. You will select the ...

Question about Honda CBR 954 RR Fireblade Motorcycles

1 Answer

...pan,remove the drain bolt, drain the oil, put the drain bolt back in, and fill the final drive to the bottom of the larger fill hole (usually a quarter to half cup of oil), then replace the large cap ...

Question about Honda CBR 954 RR Fireblade Motorcycles

2 Answers

...changing the oil on my 2002 BMW R 1150 R bike and if I need any special tools or tricks. I don't want to pay $175.00 for the repair manual. Things you will need, Drain pan, 5 quarts oil, BMW oil ...

Not finding what you are looking for?
2002 Honda CBR 954 RR Fireblade Logo

122 questions posted

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...