2002 Honda CR 250 R "axle" Questions

How do I take the brake drum off of a 2001 Honda Recon? Loosen the rear-axle nut Rotate the chain-tensioners [on each side of the rear-axle bolt] to their minimum points. Remove the wing-nut of the ...

...off the ground. Remove front brake caliber & secure so it dont hang by the hose.Remove the axle hold down bolts and slide axle out of wheel hub. You may have to tap it with a rubber mallet

My front suspension is locked up, any suggestions? i loosened the axle and the hardness is all the way down on the forks and it still won't even budge is it the forks or wheel? if forks spray with

2M400001_TO_JH2ME033-2M499999/WATER_PUMP/CR250R-02-JPN-A/2Y14KZ32KZ3AE0400A The impeller's axle (with the gear) is threaded and the impeller bolts on to it

Sit for two days and then use an air hammer to remove. The inner bearing collars are rusted to the axle. If that does'nt work you will have wast the swing arm with a cutting torch or sawsall

...shock completely and measure from the wiper to the bottom of the triple clamp on forks or from the axle to a vertical reference point on the chassis. This is L1. Take the bike off the stand, put the ...

torque settings for front axle on a kawasaki zx6r 2008 75 or 80 ft.lbs. i think no its 94 ft/lbs rear axle nut 94 ft/lbs front axle nut 14.5 ft/lbs front axle clamp bolts , the pinch bolt's that hold ...

2003 fxsts seized front wheel axle !!! I can't remove the front wheel to change tire :-( there's no real easy way out if your axle is seized in there. You need to fiind a really big hammer, brace your

have a 2007 fxstb with 200mm rear tire and want to put axle covers on it which requires removal of axle,purchased another axle to keep old axle in place while i put mount hardware on....will this work

Torque on the front axle fringe nut Let's guess you have a Harley Davidson 1200 rather than a Yamaha 125 dirt bike The front axle nut torque spec is considerably lower than the rear axle nut. The ...