2002 Honda XR 200 "removing right front axle" Questions

...front wheel of my honda 2000 xr200? i have removed the 4 screws and the plate on the right hand side fork but cant seem to remove the wheel from the break on the left side fork. is the front break ...

...right side under axle now you can remove the axle nut and axle make sure you have front tire far enough to get it out from underneath the front fender before removing axle put.back on in reverse ...

...removing the front axle, note the location of the right side spacer and left side spacer. The spacers must be reinstalled on the correct sides during installation. Withdraw the front axle from the ...

...front wheel off the ground. Undo axle nut (left side). If needed, put a punch through hole in end of right axle end to hold from turning. Loosen 2 nuts on bottom of fork clamp (left side). Pull out ...

...right axle clamp bolts ?Unscrew the axle nut . ?Place a stand under the engine to raise the front wheel off the ground. ?Remove the axle, and pull out the wheel. Take off the collars and caps from ...

...front of bike up so that it JUST supports the bike taking a little pressure off tire forth on right side of bike take the two half inch nuts off the axel support plate fifth hammer, push, use a punch ...

...front wheel from an 01 FLSTS? remove the brake caliper and tie it up,then remove the axle caps you should label the spacers left and right for installation pull axle pin and castle nut and pull axle ...

...right fork assembly off center. But if you tighten the slider caps first and then tighten axle nut you need to loosen slider cap nuts and then retighten them to 11 ft lbs. reinstall brake caliper and ...

how to remove front tire You need a special socket for the front axle. After you remove the axle the tire will come right out.

right side of vehicle, loosen nut on pinch screw. Pull axle out of hub while supporting wheel. Remove spacer and front wheel assembly. Keep track of where each of the different size spacer went so you