2002 Honda XR 200 "crankshaft" Questions

crankshaft how hard is it to rebuild U can't do it without special tools, a hydraulic press and set up jegs to align it.

...to find it sparks at the end of the exhaust stroke? Here's the deal > the chain position on the crankshaft cog makes no difference. No timing is done on that end. The timing is done when mounting ...

...tools required, right? Special pullers to remove/reinstall camshaft gears, special puller for crankshaft pinion gear, crankshaft locking tool, British Whitworth sockets for the connecting rods ...

how can i tell if my crankshaft bearing is going out Hi, if the big end bearing fitted within the con rod on the crankshaft fails it is accompanied by a knocking noise when the engine is running, when

...after the repair. If you can purchase a replacement connecting rod kit, you will have to take the crankshaft to an experienced engine rebuilder that has the equipment to press the crankshaft apart ...

CRANKSHAFT NUT ON MY GILERA RUNNER SP50 -2007. KEEPS WORKING LOOSE If the crankshaft nut is the proper one off the scoot then it have a flange on it to stop it from coming loose. It could also be that

...install My question is about oil filter removal and what do you do? Especially with regarding the crankshaft position sensor being in the way. I have just fitted a Dyna oil cooler kit p/n: 26081-05 ...

...install My question is about oil filter removal and what do you do? Especially with regarding the crankshaft position sensor being in the way. I have just fitted a Dyna oil cooler kit p/n: 26081-05 ...

...does "turn over" mean. For example, did you intend to say that the starter motor will not turn the crankshaft? or the starter tries to turn the crankshaft and the crankshaft will only go so far? ...

...engine but its still holding on. am i missing something? Yes there is a circlip/snap-ring on the crankshaft that must be removed first, then it will come apart. It is on the crankshaft right up ...