starting problem Fully charged battery and tryed to jump start from another car battery but all I hear is a clicking noise no sound of the engine tying to start whats so ever. Even with a flat battery
Question about Honda CBR 929 RR Fireblade Motorcycles
...charge it at 6 amps or 12? If the starter relay is working properly after you install the fully charged battery, and that means engaging when you hit the button, then there's no reason to replace ...
Question about Honda CBR 929 RR Fireblade Motorcycles
...reads 13 volts after being on battery tender. Is there a switch that can go bad? The bendix or starter relay on the starter is probably bad. Some can be replaced others you need to replace
Question about Honda CBR 929 RR Fireblade Motorcycles
...charge or replace battery. Loose cable to the starter, check and tighten. Relay faulty, replace with new. Starter soleniod fauly, replace. Starter motor fault, remove, inspect and repair, replace if ...
Question about Suzuki Motorcycles
...starter switch and that has not fixed the problem. Any ideas? I'm guessing one of the cutoff switches are faulty, but how do I bypass them? I don't want to keep buying switching until ...
Question about Honda CBR 929 RR Fireblade Motorcycles
...charge and has been checked for a dead Cell and wiring is good Discounect the Wire going to starter and check the voltage it is getting when pushing the starter button. If getting 12 volts or higher ...
...replace the starter. Thanks. Even though you have charged the battery it could be bad and not giving you the cranking AMPS you need for high compression motors. I'd try a new battery to see if it ...
...I would suspect the same thing, faulty starter. "replace or rebuild" Hi,try replacing the starter motor brushes,if the starter motor seems to run slow more than likly brushes are worn,all the ...
tested or replace it charging a dead battery after a 2 year period of being flat causes what is known as sulphation of the plates and the battery will not accept a charge regardless of the charge time
...replace the starter relay; if there is no clicking sound, check the start button switch, the engine ON/OFF switch, the sidestand and/or the clutch switch.Of course if bypassing the starter relay and ...
230 questions posted
Usually answered in minutes!
188 Questions
186 Questions
195 Questions
148 Questions
151 Questions