...clutch cable broken, or to loose. That's the most cheap and easy to check. It could also be that the spring inside the clutch housing is worn and needs to be replaced. Still not that expensive but a ...
Question about Honda NSR 125 Motorcycles
...replace it with an other make bearing Clutch Lever As the clutch lever is operated over time, it gradually loses its grip on the clutch cable, weakening the clutch lever action until it barely moves ...
Question about Honda NSR 125 Motorcycles
...clutch cable itself has broken strands that is making in bind up. Disconnect the cable at the motor (transmission) now see how difficult it is to squeeze the clutch lever on the handle bar. If it is ...
Question about Harley Davidson Motorcycles
replace clutch plates, and Pressure Plate> or just pressure plate???? Make sure the ball and ramp was in the proper position after you replaced the clutch cable. It should have been to the rear
...replace the clutch on an off-road motorcycle or ATV. .... Hi I have a 05 drz400sm an I just did theclutch wire, tusk clutch ... I would start with the most obvious like properly adjusting your cable ...
...replaced If you replaced the cable and you have no clcutch, recheck your work. Typically, you must adjust the clutch and or the clutch cable for proper operation. Thanks for your interest in ...
80 questions posted
Usually answered in minutes!
188 Questions
186 Questions
195 Questions
148 Questions
151 Questions