2000 Honda NSR 125 "remove front" Questions

Ad

Question about Honda NSR 125 Motorcycles

3 Answers

remove bold to lift up fuel tank (found near handle bars ) 3) you will then see oil tank there 4) remember use good quality 2stroke oil its under the front of the tank take the seat off undo the allen

Ad

Question about Honda NSR 125 Motorcycles

1 Answer

remove the front brake caliper mounting bolts. Once you have the brake off of the rotor, replace the bolts back in the caliper to prevent losing them. Hang the brake using cable ties or twine. BE SURE

Ad

...Remove the front wheel. Remove the front fender and cross brace. Disconnect the brake calipers from the forks. Remove the air connections from the fork tops. Loosen the fork leg clamp bolts on the ...

Question about Honda NSR 125 Motorcycles

1 Answer

...Remove front wheel. 6. Remove front fender bracket with front fender. 7. Loosen but do not remove fork tube caps. 8. Loosen all pinch bolts on top and bottom triple clamps and pull fork tubes from ...

Question about Honda NSR 125 Motorcycles

1 Answer

front seats. • Remove the fuel tank. • Remove the right frame cover 1 (remove hooked part) • Remove the spark plug cap • Remove the spark plug with a spark plug wrench. No. 2 (REAR) SPARK PLUG REMOVAL

Question about Honda NSR 125 Motorcycles

1 Answer

...remove the front tire on a 05 roadking You first have to remove the brake calipers then after raising.front tire off ground, loosen but don't remove axle nut, then loosen the two nuts on right side ...

remove the front panel of a Kymco 150 scooter? To remove the front panel of a Kymco 150 scooter, you will need to follow these steps: Locate the fasteners that hold the front panel in place. These are

Question about Honda NSR 125 Motorcycles

1 Answer

remove front forks off harley sportster jack up bike so front wheel is off the ground remove brake cal. wire it up out of way.then remove front fender.loosen axle nut and remove and remove wheel then ...

Question about Honda NSR 125 Motorcycles

1 Answer

the front wheel is off the ground. 1, remove front mudgaurd, 2, remove brake caliper, 3 disconnect any speedo drive cable or wires, 4, loosen axel nut, and withdraw the axel, 5, remove the front wheel

Question about Honda NSR 125 Motorcycles

1 Answer

...remove the front wheel of my honda 2000 xr200? i have removed the 4 screws and the plate on the right hand side fork but cant seem to remove the wheel from the break on the left side fork. is the ...

Not finding what you are looking for?
2000 Honda NSR 125 Logo

80 questions posted

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...