1999 Honda CBR 900 RR Fireblade "generator problems electrical" Questions

pump problem or fuel filter is clogged. if its electrical.... its probably your spark unit or pulse generators. check for loose connections

...are some electric tests for the stator but not allways correct I would try a stator You need new generator ...

...problems too.  Lastly, check the connections between the battery and the frame (ground).  If there is corrosion or a faulty connection, it will cause the bike to drain more power than the ...

generator, alternator, or ignition coil. Hi Mate, You should have a '85 - '87 twin carb thumper like mine. On the L/H side of the engine close to the sprocket is some wiring comming out of the engine

...electrical, disconnect the black/white wire from the engine stop switch, try and observe if problem persists: if yes, then a loose / dirty / faulty engine stop switch; if not check: 2 connectors to ...

...generator coils and start up your engine. Problem still there? Do this to find out if your problems stems from the power side or the ignition side. If bike now runs fine, I'd look at the voltage ...

can't get plugs to fire You have an electrical problem that will have to be traced back to the source. First, change one of the plugs and see if that solves it. If not, check your ignition coils. Make

hour after ridding I believe it may be the kill switch/anyway it must be an electrical problem This sounds like a bad pulse generator especially if the bike will start again after a cooling off period

...problems involved in this sort of conversion. You will need to obtain a regulator/ rectifier, and change all the bulbs including the speedo etc. A problem often forgotten is the battery could be ...

...generator. Try charging the battery up then see if it starts, if not you'll have to check the connections at the battery, also load test the battery, make sure it;s good. Just my opinion, but if it's ...