1997 Honda CBR 600 F(3)V "wires work ignition switch 95" Questions

...switch, the one that lets the ignition fire when cranking only when the clutch is pulled in. A safety feature so you don't dump the bike if you crank it while in gear. my cbr f3 will start up but but ...

ignition switch on, one of the lugs on the switch should have voltage on it. If not, trace the wire back to the switch looking for a break. If it does, the switch is probably bad but you should have a

...work, parked it in the garage, and went out to leave the next morning and nothing happened when I turned the key on. I load tested the battery and found it bad so I replaced that and it did not fix ...

...wires that supplies power to the rest of the bike. The large cables that connect to the battery supply current to the starter circuit. There is a smaller wire that supplies power to the rest of the ...

...ignition switch, check for loose connections and continuity. 5. Failed system and or ignition relay, check for continuity. 6. Failed ignition coil, stator, magneto, ignition/electronic module. 7. ...