1997 Honda CBR 600 F(3)V "adjust gears bike" Questions

bike jumps and stalls when put into gear Sounds like your clutch is partially engaged. You may be able to adjust the screw near the lever to tighten the cable (take out the slack) and allow the clutch

...bike bogs ... I have cleaned the carbs but know that it is a carb problem..... it can be the floats are not working correct or air-fuel ratio needs adjusting, any suggestions will be appreciated Hi, ...

...gears. If it shifts all the way to fifth gear and back down, then the problem is not in the transmission. If you can't shift the transmission into any gear with the bike not running, just rocking it ...

bike and shift through all the gears which supposedly means the gears are okay. If your clutch is not slipping check your shift linkage joints. Rocking the bike lets you know your tranny has gears but

...little to remove any built up or stuck crud on the plates. Other possible cause,improper free play adjustment,notched clutch

...appreciated There are two possible solutions here.1. Adjust the Clutch Lever2. Adjust the Gear LeverI had this problem on a different bike years ago and the above solved the problem. Good Luck. ...

...is off and in gear with clutch engaged the bike does not move. Can anybody help me... hi mate adjust the clutch cable when you put it into gears the clutch is still grabbing so it needs to be ...

...gears. Hello. I am a new rider. I had my suzuki boulevard m50 2006 in the garage for a long time. When i started, i shift the motorcycle to first gear and the engine stop. Any time i try to shifted, ...

...ans sometimes takes a while to get shifted into gear possible crank bearing failed and incorrect adjustment on the clutch cable or the clutch it ...

...gears stuck and can not get it out of gear - is there an adjustment or a online manual that i can read to fix the problem - thanks make sure the clutch cable is properly adjusted, next thing would be ...