1992 Honda CB 750 Nighthawk "idle screw" Questions

...idle screw for cb nighthawk 750 where is the idle screw for 92 cb nighthawk 750 follow your accel cable to the carb. move the throttle till you see where the linkage moves. look around the linkage to ...

the idle mixture screws first and then adjust the idle speed screw to compensate adjusting the idle mixture screws will alter the idle speed but when properly adjusted then adjust the idle speed screw

...Idle Screw (Air/Fuel Mix): The idle screw, also known as the pilot screw, adjusts the air/fuel mixture at idle. It affects the fuel flow from the pilot jets (idle jets) into the carburetors. Locate ...

...IDLE SCREW adjusts the idle SPEED. Try screwing in the AIR SCREW 1/2 a turn and see if that helps. If not, try another 1/2 turn. Still no idle? Turn the screw back where it was (1 full turn) and then ...

...vacuum leaks and the idle screw is turn up. Then adjust the a/f ratio screw to highest idle, turn down the idle screw and repeat until a/f screw makes no change. At that point you set your idle

...Idle Screw: Turn the idle adjustment screw clockwise to increase the idle speed and counterclockwise to decrease it. Make small adjustments, usually a quarter or half turn at a time. Monitor the ...

idle, screw the idle mixture in until it just barely "bottoms" in the hole. Back it out 1 1/2 turns on the "butterfly" carb and about 3 turns on the "CV" carb and start the engine. Adjust the screw to