1990 Honda GL 1500 SE Gold Wing "change turn signal light 1993" Questions

...turn on, but will not auto cancel. I can't change the air pressure of the rear shock. The cruise control light goes on, but the cruise will not set and the cruise set light will not go on. When i ...

...turn signal lights solid, hazards work Right turn signal lights solid, hazards work properly. Have changed the canceller module and flasher. CHANGE THE BLINKER RELAY OR ADD ONE IN THE GROUND

...change turn signal microprocessor module or do I need load equalizer or something eles? First, I'd try replacing the bulbs in both the front and rear turn signals. See what happens, that's pretty ...

...have a bad bulb the hazards work off the brake light side of the dual fillament in the rear bulbs change the right rear turn bulb and all should be good if not look under the seat for a pinched ...

...change turn signals to bullet signals, new ones won't flash. Your bike is equipped with a turn signal microprocessor to make the "cancelling turn signals" work. It is very sensitive to the ...

Changed the handlebars and now the bike wont start. Makes a clicking sound like turn signals and the brake lights and headlights blink at the same time. Any suggestions It sounds like you've gto a

...turn signal mirrors to new ones with running lights. How do you replace them?? Do you have to run new wires? Being that the '93 model did not come with "running lights', not only will you have to run ...

turn on the lights. Examine the fuses and see if there are any blown. Check the switch is getting voltage with a test light by putting one side on metal and the other on the wires to the switch one by

...light or volt meter to the wire. Turn on the ignition switch and press the start button. The test light should light up or the meter should show battery voltage. If it does, the problem is in the ...