1989 Honda GL 1500 Gold Wing "need" Questions

...does not turn the engine around as if something has twisted off inside the engine You will need to remove the right sidecase cover to get to the starter assembly. Once inside, you should be ...

washed 89 goldwing and electric shorted and melted part of main wiring harness.need harness Yes, you need a harness. Did you have a question about that?

All bulbs are burned out. Need to replace. All bulbs are burned out. Need to replace. What bulbs to use? Are the Honda part #'s? if only bulbs required normal bulbs will do if bike is 12 volt.

...You will find that the pawls and springs that slide the selectors to change gear are probably in need of adjusting or worn. Not an easy job but you will need the workshop manual of at least Haynes ...

...gl1500, idles smooth but stumbles when you try to accelerate in N. top speed about 75mph. Carbs need cleaned remove air cleaner. start engine. rev up some by bliping the throttle. do both sliders ...

need accurate 1989 Honda Goldwing carbureto/hose information need to find detailed rendering or scimatic of 1989 honda goldwing carburetor, to see proper installation of all hoses providing fuel, air,

I need to get the color code for 1989 Wineberry Red Goldwing? We built a trailer and want to paint it the same as our 1989 Goldwing. Wineberry Red, but I need the color code. It took all evening, but ...

Need p/n for RM-G30P female connector for the radio 96 GL1500 or where to purchase one. Another suggestion can you or the shop try to build a cable that would fit your need? If the shop have the ...