Question about Honda CBR 600 F Hurricane Motorcycles
I have just replaced the clutch on a 1988 Hurricane 600. The final step before replacing the side cover, is to torque down the four bolts that pass through the clutch springs -- but the manual says ...
...WHEN THE BIKE IS STANDING FOR ADAY OR SO , IM UNABLE TO START BIKE WITHOUT THE BIKE JOLTING FORWARD,CLUTCH PULLED IN, THE ONLY WAY IT RELEASES , WHEN THE BIKE IS IN NEUTRAL AND I PUSH BIKE BACK AND ...
Question about Honda CBR 600 F Hurricane Motorcycles
1987 honda 600, starts fine, as soon as you try to get it in gear stops, thought was clutch, but with motor off, 1st gear with clutch applied the bike can be pushed easily.... what it can be? ...
...sat for about a year and it shifted fine before that. ???? There is a very very good chance the clutch plates have fused together.When they sit around and not move they can bond together.If you ...
Question about Honda CBR 600 F Hurricane Motorcycles
engine continues revving when the clutch is engaged when starting the motorcycle it starts fine but after driving about 3/4 of a mile with the choke off and not touching the throttle it continues ...
...Do not use any oil that says Energy Conserving on the label it will shorten the life of the wet clutch and transmission gears. Use 10w-40 in colder climates and 20w-50 in summer or warmer
Question about Honda CBR 600 F Hurricane Motorcycles
...every 6000 miles. Use 10w40 motor oil. NEVER use synthetic lubricants as they can mess up the clutch.Oil the chain every two weeks. Lube the control cables every oil filter change.Keep the gas ...
...bump the bike in 2-3 gear just simply go down a hill rolling then when you get enough speed let the clutch out and it should start then just leave it running for 10-20mins so the alternator charges ...
81 questions posted
Usually answered in minutes!
35 Questions
31 Questions