Question about Honda VT 1100 C Shadow Motorcycles
BRAKE FLUID PUMP IT UP I LOSE PRESSURE EVERY TIME!! 1991 SPORTSTER 1200 THANKS If you don't have a leak somewhere, you have air in the system. When "pump up" the brakes, you use the brake fluid to
...brake calipers cant figure out why Assumeing you have been trying to bleed the brakes and assumeing you tried that because your brakes quit working. Check a couple things. First try opening the ...
...of dot3/4 brake fluid and bleed the clutch slave cylinder to get the air out. If you can not build pressure or lose pressure after bleeding, replace the seals in the master and slave and bleed
...brake fluid in your master cylinder. Add only the proper type of fluid called for on the top of the master cylinder cap. DO NOT MIX THE TYPE OF BRAKE FLUIDS. Check the brakes before riding the bike. ...
Question about Honda VT 1100 C Shadow Motorcycles
...brake fluid and the brakes were fading.He wasn't sure if they put any new parts on the bike or just flushed the system.Main thing was though,after the bike got hot,the clutch faded to nothing.I hope ...
...brake fluid in your master cylinder. Add only the proper type of fluid called for on the top of the master cylinder cap. DO NOT MIX THE TYPE OF BRAKE FLUIDS. Check the brakes before riding the bike. ...
...brake completely ive bled the brakes numerous times i get full brakes but still does the same thing when i ride any advise? thx mike About the only ways air can get into the system is either a leak ...
Question about Honda VT 1100 C Shadow Motorcycles
...brake fluid so i am at a loss. could the disc need to be machined and if so would this be covered by warranty. if it seem spongy then i would bleed the system of air. air can be compressed, fluid can ...
Question about Honda VT 1100 C Shadow Motorcycles
...brake fluid, but the cover on the resevoir will tell you. or refer to your owners manual to make 100% sure.IF I remember right, the right caliper is independent from the rear brake. but dont hold me ...
...brake fluid in your master cylinder. Add only the proper type of fluid called for on the top of the master cylinder cap. DO NOT MIX THE TYPE OF BRAKE FLUIDS. Check the brakes before riding the bike. ...
89 questions posted
Usually answered in minutes!
129 Questions
50 Questions
47 Questions
33 Questions
28 Questions