1988 Honda XR 600 R "hydraulic lifter adjust" Questions

adjust the valves periodically on any 4-stroke engine. Your owner's manyal should list a suggested interval. The interval will be very long for engines with hydraulic lifters, but to my knowledge your

...lifter adjustment IF I recall correctly, the Kawasaki valves are adjusted by shims as opposed to a lock-down screw or hydraulic lifters. The shims come in different thicknesses. As the valve parts ...

hydraulic lifter and the Exhaust pair has one hydraulic lifter) The recommend service / checking interval is 20,000 kms. (12,000miles approx) according to the manual. I have 15800 miles on my 2008 and

...(not likely) your valve lifter clearance should be listed in any Haynes repair manual for that year/model. More than likely you have hydraulic valve lifters and they must be replaced (no

...adjust them with it still in? Your motorcycle has hydraulic lifters that run off of oil pressure. Your valves never need adjusting. Now the problem, the hydraulic piston assembly that operates the ...

...adjust my pushrods That should have hydraulic lifters and can be a bit noisy. If it has solid lifters then adjustment must be done by removing the pushrod covers. Would be best to get a manual and ...

...hydraulic lifters and need no adjustment unless internal engine work was performed. They are set from the factory and rarely need service. If you have a loud "tick" and a pushrod is loose, a lifter ...

deceleration). When automatic cam chain adjusters are going bad you get a clicking sound, or worse, hydraulic valve lifters (for zero tolerance) going bad. Lifters tend to be a loud clacking sound. is

...advice is a) leave 'em alone until b) You've bought a Haynes manual for the Sportster series - which tells you everything you need to know about this bike. You don't adjust them as they are

...don't have valve adjustments they have hydraulic lifters you can adjust if you have upgraded to adjustable pushrods and the specs for adjustable pushrods are all different depending on the ...