1985 Honda GL 1200 Ltd. Ed. - SE-i Gold Wing "brake fluid" Questions

Ad

Question about Honda GL 1200 Ltd. Ed. - SE-i Gold Wing Motorcycles

1 Answer

...brake fluid The rear brake reservoir should be under the right side cover. It unscrews and you can add fluid.You might have a 8 or 10 mm bolt holding the cover down, but more likely you'll have to ...

Ad

Question about Honda GL 1200 Ltd. Ed. - SE-i Gold Wing Motorcycles

1 Answer

Brake fluid will eat away at plastic and paint! Wipe any spilled fluid with the rag and lots of water. Tools needed: Wrench/Spanner (average 10mm) Brake bleeding kit (rubber fitting, clear hose, small

Ad

Question about Honda GL 1200 Ltd. Ed. - SE-i Gold Wing Motorcycles

1 Answer

brake fluid change HI i want to change the brake fluid on my w 650. remove brake fluid resovior cap, get jar and lenght of flexable tube that will fit on bleed nipple of brake calipar, put some brake ...

Question about Honda GL 1200 Ltd. Ed. - SE-i Gold Wing Motorcycles

1 Answer

brake fluid in it. Fill the reservoir with the recommended type of fluid. The proper type of fluid is printed on the top cover for the reservoir. Never mix the different types of brake fluid, they are

Question about Honda GL 1200 Ltd. Ed. - SE-i Gold Wing Motorcycles

1 Answer

brake fluid info what are the brake dot types? DOT3 DOT3 brake fluid is the "conventional" brake fluid used in most vehicles. One of the most familiar brands is "Prestone." Advantages: * DOT3 fluid is

Question about Honda GL 1200 Ltd. Ed. - SE-i Gold Wing Motorcycles

1 Answer

...brake fluid. It's written what type to use right on the reservior top cover. Do NOT allow the reservior to run dry during the brake bleeding process and be careful with the brake fluid, it can damage ...

Question about Honda GL 1200 Ltd. Ed. - SE-i Gold Wing Motorcycles

1 Answer

...brake fluid can flow out and into container, automatically your pedal will goes down and fluid will stop flowing then close nipple and repeat process until all fluid are flowing clear of bubbles. If ...

Question about Honda GL 1200 Ltd. Ed. - SE-i Gold Wing Motorcycles

1 Answer

brake fluid from splashing on your bike. To bleed the brakes, depress and hold the rear brake pedal. Open the bleed valve on the rear brake about a half turn and allow the brake fluid and air to bleed

Question about Honda GL 1200 Ltd. Ed. - SE-i Gold Wing Motorcycles

2 Answers

BRAKE FLUID PUMP IT UP I LOSE PRESSURE EVERY TIME!! 1991 SPORTSTER 1200 THANKS If you don't have a leak somewhere, you have air in the system. When "pump up" the brakes, you use the brake fluid to

Question about Honda GL 1200 Ltd. Ed. - SE-i Gold Wing Motorcycles

1 Answer

...brake fluid in a yamaha xvz how to change the brake fluid in a 1983 yamaha xvz Keep filling the master cylinder fluid reservoir with new brake fluid of the right type. ( DOT 3, DOT 4, Dot 5 ) Put a ...

Not finding what you are looking for?
1985 Honda GL 1200 Ltd. Ed. - SE-i Gold Wing Logo

32 questions posted

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...