1985 Honda GL 1200 Interstate Gold Wing "timing" Questions

where are the timing marks on a 1200cc Honda Goldwing Interstate? Don't answer if you don't have experience on this as the marks are not where they are on other Honda Goldwing engines. Let me ...

...with this problem Have you checked the valve lash lately. Many times backfiring is from improper timing an valves not set

How do I change timing belts on a 1200cc Honda Goldwing The only thing usually necessary is to pull a little slack in the carb heater air hose to get enough room to pull the plastic belt cover free. ...

how to change timing belt 1985 goldwing How to change timing belt on 1985 honda goldwing Timimg belt replacement 1985 honda goldwing You need a shop manual for that project.

...1984 pulse generators are located in a different area and am not sure where that is. Under front timing cover?? Bike is like new has only 27,000 miles. This is first problems I have incurred. Can ...

...be located and could they be listed as ignition control unit, or ignition coils? I had taken the timing cover off and checked the pulse Generators and the timing marks where in the proper marks, I ...

1985 honda goldwing 1200 oil seems to be leaking from timing belt cover thinking maybe crank shaft gasget? Most likely it is a valve cover gasket. There is a cam seal underneath the cam belt timing ...

turn signals not working, hazzerd works, fuses ok, what to look for Most motorcycles use a "flasher" to operate the signal lights.Older ones used a mechanical type that heared up a bi-metalic strip ...

Hi,I just bought a 84 honda goldwing interstate. Bike hasnt been run for about 6 years. Got da bike started,changed the oil,spark plugs,antifreeze,fuel filter,cleaned the fuel tank, new battery. The ...

Is it a bad fuel pump I had ben riding all day turned it off and it would not start at my last stop. I came back the next day and it would not start towed it home thought the fuel pump went out ...